HUBライト
【0.9W or Lower Hub Dynamo Light】YB-300 – Hapyson Cycle
Automatically light up Automatically light up when riding at night
Basket mounting Can be mounted under the basket.
Handlebar mounting Can be mounted on the handlebar.
Conform to JIS standard Light intensity conforms to JIS C9502 (2021) standard.
Retro-reflector Retro-reflector is welded on the lamp.
Hapyson introduces a new replacement light designed exclusively for hub dynamos.
Compatible with major Japanese hub dynamo manufacturers‘ products which rated at 0.9W or lower.
※ Operation is guaranteed when used with Hapyson and Panasonic hub dynamos.
The light is compatible with other dynamos terminal, so it is not necessary to change dynamo terminal.
This product includes two terminals compatible with Hapyson and Panasonic hub dynamos.
【Characteristic】
- Automatically turns on during night riding.
- Road-focused beam that is gentle on oncoming traffic (Downward illumination with partially cut upper light).
- The angle is adjustable (left to right) when light is mounted on the handlebar.
- Includes removable retro-reflector.
- This light can be mounted on both under the basket and handlebar.
- Light intensity conforms to the JIS standard.
※ When use with Hapyson or Panasonic hub dynamos.
- Hub dynamo powered — no worries about power depletion!
【Specification】
| This light is applicable for the below hub dynamo models | Hapyson: YRH001, YRH017, YRH027, YRH024, etc. Panasonic: NRH001, NRH017, NRH024, etc. SK: Be compatible (6V-0.9W or lower) Can be used with major domestic manufacturers’ 6V-0.9W or lower, two-wire hub dynamos. (Operation guaranteed when used with Hapyson and Panasonic hub dynamos) |
|---|---|
| Power | Rated 6V-0.9W or lower hub dynamo |
| Light source | Ultra-High bright 0.5W, white LED ×1 |
| Centre light intensity | About 20lx (10m ahead, riding speed at 15km/h, connected to YRH001 hub dynamo) |
| Weight | About 40g ※ With retro-reflector attached, excluding holder and accessories |
| Size | About 40 × 67 × 63 mm ※ When retro-reflector attached, excluding holder and accessories |
| Length of cable | About 1000 mm |
| Applicable handlebar diameter | Attached holder: φ 22–25.4 mm Optional holder (Part No. YB-300CYBC): φ32 mm |
| Attachment | Terminals ×2, under-basket bracket, mounting rubber, mounting screws, nuts, cable ties ×3, cable clips ×3 |
【JAN CODE】
・YB-300-K(Black)：T4571383195462
| Specification |
|---|
